Leaning IN to my UX

$ stat / | grep Birth | cut -d ' ' -f 3
2022-01-24

Today (although this won't go live until the 25th in my time zone) is three years since the day I finally kicked Windows to the curb and installed Linux on my home desktop. I'd used Linux before, but all my life I'd had a habit of just using whatever OS was provided to me, without really giving it much thought.

In late 2021, Windows Update told me — entirely unprompted — that my system didn't meet minimum specs to run Windows 11. (Perhaps it would now — I understand that the declared requirements have been relaxed, even if nothing has been optimized or stripped down — but I don't care to check. I'm also told that people still on Windows 10 are under increasing pressure to switch, even though they're still comfortably in the majority — unless something has radically changed in the last few months.)

I found this impolite — as I hadn't asked, and didn't consider anything wrong or inadequate about my computer — and a bit absurd (whatever they're offering now that requires more computing power, I'm not interested; especially not if it's anything to do with Cortana). So I took that as my cue to switch. I bought a new SSD (figuring I would need the space anyway) and attempted to set up a dual boot — GRUB never worked properly for me, but I could still use the BIOS screen to boot Windows from the old SSD.

And I never looked back.

Today, I'd like to relate a few anecdotes about that experience.

I use Mint, btw

When I made the switch, I recalled an older recommendation from a family member, claiming that Mint provides a relatively more Windows-like experience out-of-box. My own research seemed to confirm that this was a popular choice for migrants from Windows.

While I'm sure I could have handled setting up a "less friendly" Linux distribution, I figured that life was too short for that sort of thing. Mint comes with Firefox (already my browser of choice — although perhaps I should rethink that)¹, LibreOffice (I had already played with OpenOffice on Windows) and GIMP (unfamiliar, but fully-featured at least) bundled, and offers the Cinnamon desktop environment pre-installed so I wouldn't have to figure that out.

There's a lot included that I'd probably rather do without² but I've been too lazy to look into what can be safely removed, or whether it's any more involved than just uninstalling it with Apt. All in good time. My /usr folder is still quite reasonably sized.

My initial impressions were quite positive (and I'm still overall very happy to have switched). I noticed the OS using considerably less RAM "at base" (i.e. with one user logged in, just looking at the desktop), and the system was much leaner.³ And system updates — accepting nearly everything the built-in Update Manager proposes, because life is again too short — run much faster.

I was happy to find that I recalled basically all my years-old knowledge of the Linux command line, too. It was also nice to be able to find human-readable config files for at least some things (dconf notwithstanding) and to be able to create .desktop files that are quite a bit more functional than Windows shortcuts to executables.⁴

The main thing I missed in using the GUI is that Nemo apparently doesn't support right-dragging — the context menu shows up immediately when the right mouse button is pressed.

Really, the worst thing about Mint isn't the software itself; it's the support. Users on the forum (reasonably) assume you're an unsophisticated beginner and often whiff on more advanced issues (or give dogmatic advice that ignores your needs and values). The package repositories give you outdated versions of software, and then the corresponding projects aren't interested in your bug reports or support questions because of that. It's bad enough that the included software sometimes includes its own workarounds: in particular, Hypnotix will manage its own version of yt-dlp separate from the system. (And it really does need to; the version included in a new Ubuntu release could plausibly be rendered non-functional before the corresponding version of Mint is even available, because it's hacking around YouTube not actually providing a stable API.)

Traps for the Unwary

For my initial setup, I chose to create a separate /home partition (leaving not a lot of space for system files) and swap partition (much larger than reasonable).⁵ I don't really regret the former, but it has caused problems a few times.

The first major problem was that Timeshift's default configuration put snapshots into the / partition.⁶ I hadn't allocated space for this and likely would have ended up in a login loop situation (or even been dropped to the dreaded "busybox prompt") if I had logged out; as I recall, I managed to delete the snapshot and reconfigure Timeshift before any serious issue arose. The built-in tool for recovering the system from major problems, can cause major problems by using up disk space in the place where it's most precious.

Later on, with the various system updates, I learned that old copies of the kernel (and other packages) will accumulate and need to be cleaned out every now and then with sudo apt autoclean and sudo apt autoremove. And then I learned about the constantly-growing-by-default log file.⁷

Eventually I did run into a login loop as a result. The rational course of action, most likely, would have been to boot from rescue media; in my panic, I fired up Windows 10 instead (and suffered through a mountain of Windows 10 updates before I could use it to research the problem, and then finally go back and fix it). But from here I learned that I could use a keyboard shortcut to get to a virtual console, and from there I was able to get things back to normal (by trimming logs and removing old kernels to make space; nothing complicated about it⁸).

Having it my way

As I mentioned in the introduction, when I set up the system originally, I had intended to get GRUB working with dual boot. It didn't work right away, and I quickly gave up on trying to diagnose the problem — especially after seeing all the reports of working configurations getting corrupted by later Windows updates anyway, people running into issues with Secure Boot, etc.⁹

But as it happens, that one time that I ran into a serious space crunch with Linux ended up being the only time I booted Windows ever since. I think I can safely say I've left it behind for good, although I still have the old SSD (which, I suppose, serves as one more backup of some of my old data).

Late last year, after upgrading Mint (all the way from 20.3 to 22), I decided to repurpose the partition I'd made on the new SSD for Windows. It's now where my home folders reside, while the original "Linux user-space" partition is now for large data (shared between user accounts). I've also ended up with a rather complex system of bind mounts and redirections, intended to make things easier for myself should I ever try my hand at distro-hopping. (Of course, no plan survives first contact with the enemy….)

Specifically, my setup involves:

• a 16GB partition hosting /usr, /etc and some other small system directories

• swap and boot partitions

• a /home partition which is about 1/4 of the drive, which also holds:

  • regularly-scheduled Timeshift backups (because my external media is usually not plugged in)

  • bind mounts for /opt and /tmp

  • a user_files/ subdirectory, which contains each user's real Desktop folder (and other such folders like Documents etc.; but I don't use those)

  • a distro-specific subdirectory which contains the actual user home folders, which themselves symlink into the user_files/ as needed, and also has /var bind-mounted

• and a /home/media partition for the balance of the drive.

I debated over the proper mount point for the shared files — eventually I decided that a subdirectory in /home would be cleanest, but I suppose I could just as easily have made it /data or /srv. The reason /var is treated differently from /opt and /tmp is that I figure I'd want to share software between distros in /opt¹⁰ but I'd want to keep separate logs for each distro in /var. Unfortunately, it turns out that Flatpak likes to use /var rather than /opt — the latter would make far more sense to me for "portable" software, but it is what it is.

A Fistful of Dollar Signs

I can't really think of a good way to conclude the prose for this post, so instead let me just dump out some of the aliases and functions I've set up in my ~/.bash_aliases that have made my life easier. I hope they can benefit you, too.

1. A couple of commands for fixing line endings in Git repositories (important when migrating from Windows to Linux):

   alias git-readd='git rm --cached -r .; git add .'
   alias git-refresh='git ls-files -z | xargs -0 rm; git checkout .'
   

   The git-readd will re-add everything from the working copy, which gives Git's core.autocrlf setting a chance to re-process the line endings. Then git-refresh will check out the re-processed files. This allowed me to start with a working copy and repository both using Windows line endings, and convert both to Linux line endings.

2. An alias to make the first push of a new locally created Git branch:

   alias git-first-push='git push --set-upstream origin `git branch --show-current`'
   

   Git is queried to get the name of the current branch, which is then used to --set-upstream for the push.

3. A wrapper for forking GitHub projects for quick fixes:

   github-dev() { IFS="/" read -r repo project <<< "$1"; git clone --depth 1 https://github.com/${repo}/${project}; cd ${project}; git checkout -b $2; }
   

   This is run like github-dev user/project feature, which will clone the most recent commit for the user/project GitHub repository, cd into it, and switch to a new feature branch.

4. Some wrappers for wc:

   lc-all() { find . -not -path '*/.*' -type f "$@" -print0 | xargs -0 wc -l; }
   lc-sorted() { lc-all "$@" | sort -h; }
   lc-total() { lc-all "$@" | tail -n 1 | awk '{print $1}'; }
   cc-all() { find . -not -path '*/.*' -type f "$@" -print0 | xargs -0 wc -c; }
   cc-sorted() { cc-all "$@" | sort -h; }
   cc-total() { cc-all "$@" | tail -n 1 | awk '{print $1}'; }
   

   These let me easily sum the lines and/or bytes taken up by, say, all the Python files in a project. Hidden files and folders are excluded by default; additional arguments can be passed through to find. The find results are processed (via xargs) into separate arguments for the wc command, allowing it to collate the results.

5. My Python "project management" setup:

   alias activate-local="source .local/.venv/bin/activate"
   alias try-it="(cd .local/ && source run-acceptance-test)"
   activate-pipx-venv() {
       source "`pipx environment --value PIPX_LOCAL_VENVS`/$1/bin/activate";
   }
   pipe() {
       if [ -z ${VIRTUAL_ENV+x} ]
       then
           echo "No venv active; use pip instead"
       else
           ~/.local/bin/pip --python `which python` "$@"
       fi
   }
   global-pipx-install() {
       sudo ~/.local/bin/pipx@171 install --global --pip-args='--only-binary=:all:' "$@"
   }
   

   I have multiple versions of Python compiled from source and set up in /opt, with symlinks to the binaries in /usr/local/bin; and I have a Python script in /usr/local/bin which simplifies making a venv for a given Python version as well as installing the current project into that venv. The venv is created at .local/.venv relative to the project root, so I have an alias to simplify activating that from the project root. The .local directory can house an informal acceptance test, as well as other files that I neither want to commit nor mention in the repository's .gitignore — so it contains its own .gitignore file with just * (i.e., everything in that folder is ignored; and since the folder is empty from Git's point of view, it never itself gets added).

   activate-pipx-venv, pipe and global-pipx-install were explained in my previous Python packaging post¹¹.

6. A scan for broken symlinks:

   broken-symlinks() { find -L . -type l "$@"; }
   

   The idea is that telling find to follow symlinks will normally prevent symlinks from showing up in the results (because they were followed instead of being treated as results) — unless they're broken, since then they can't be followed. Thus, filtering the results to just symlinks, shows any broken symlinks.

   This has been useful for diagnosing Python virtual environments that were broken when either the folder moved or the underlying Python did. Looking at it again, this could and probably should be an alias rather than a function, but whatever.

Meta

It's been almost two weeks since my last post and I certainly hoped I would have something else written up in that time. I've been struggling with the next post in my Python packaging series, which is supposed to be about a long-standing pip bug. But I've been feeling rather distracted from it, at least in part because pip 25.0 is in development and probably coming out soon. I don't expect that the bug will be fixed, but it would be a bit embarrassing if it were and I went on at length about it just days before.

I really should have written something else in the mean time, but I didn't really commit to the decision until now — I knew long in advance that I would be writing this post, because I knew this anniversary was coming up.

Changelog

June 7, 2026: Fixed some typos and typography as part of a general cleanup. (In particular, replaced a lot of hyphens with proper em-dashes, and converted some parentheticals to footnotes.) Added some additional footnotes and links. Also moved the Meta section to the bottom.